StreamMessage

All Superinterfaces:

Message
```
public interface StreamMessage
extends Message
```
A StreamMessage object is used to send a stream of primitive types in the Java programming language. It is filled and read sequentially. It inherits from the Message interface and adds a stream message body. Its methods are based largely on those found in java.io.DataInputStream and java.io.DataOutputStream.
The primitive types can be read or written explicitly using methods for each type. They may also be read or written generically as objects. For instance, a call to StreamMessage.writeInt(6) is equivalent to StreamMessage.writeObject(new Integer(6)). Both forms are provided, because the explicit form is convenient for static programming, and the object form is needed when types are not known at compile time.
When the message is first created, and when clearBody is called, the body of the message is in write-only mode. After the first call to reset has been made, the message body is in read-only mode. After a message has been sent, the client that sent it can retain and modify it without affecting the message that has been sent. The same message object can be sent multiple times. When a message has been received, the provider has called reset so that the message body is in read-only mode for the client.
If clearBody is called on a message in read-only mode, the message body is cleared and the message body is in write-only mode.
If a client attempts to read a message in write-only mode, a MessageNotReadableException is thrown.
If a client attempts to write a message in read-only mode, a MessageNotWriteableException is thrown.
StreamMessage objects support the following conversion table. The marked cases must be supported. The unmarked cases must throw a JMSException. The String-to-primitive conversions may throw a runtime exception if the primitive's valueOf() method does not accept it as a valid String representation of the primitive.
A value written as the row type can be read as the column type.
```
 |        | boolean byte short char int long float double String byte[]
 |----------------------------------------------------------------------
 |boolean |    X                                            X
 |byte    |          X     X         X   X                  X
 |short   |                X         X   X                  X
 |char    |                     X                           X
 |int     |                          X   X                  X
 |long    |                              X                  X
 |float   |                                    X     X      X
 |double  |                                          X      X
 |String  |    X     X     X         X   X     X     X      X
 |byte[]  |                                                        X
 |----------------------------------------------------------------------
 
```
Attempting to read a null value as a primitive type must be treated as calling the primitive's corresponding valueOf(String) conversion method with a null value. Since char does not support a String conversion, attempting to read a null value as a char must throw a NullPointerException.
Since:

JMS 1.0

See Also:

Session.createStreamMessage(), BytesMessage, MapMessage, Message, ObjectMessage, TextMessage

Field Summary
- Fields inherited from interface jakarta.jms.Message
  DEFAULT_DELIVERY_DELAY, DEFAULT_DELIVERY_MODE, DEFAULT_PRIORITY, DEFAULT_TIME_TO_LIVE

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method and Description
`boolean`	`readBoolean()` Reads a `boolean` from the stream message.
`byte`	`readByte()` Reads a `byte` value from the stream message.
`int`	`readBytes(byte[] value)` Reads a byte array field from the stream message into the specified `byte[]` object (the read buffer).
`char`	`readChar()` Reads a Unicode character value from the stream message.
`double`	`readDouble()` Reads a `double` from the stream message.
`float`	`readFloat()` Reads a `float` from the stream message.
`int`	`readInt()` Reads a 32-bit integer from the stream message.
`long`	`readLong()` Reads a 64-bit integer from the stream message.
`java.lang.Object`	`readObject()` Reads an object from the stream message.
`short`	`readShort()` Reads a 16-bit integer from the stream message.
`java.lang.String`	`readString()` Reads a `String` from the stream message.
`void`	`reset()` Puts the message body in read-only mode and repositions the stream to the beginning.
`void`	`writeBoolean(boolean value)` Writes a `boolean` to the stream message.
`void`	`writeByte(byte value)` Writes a `byte` to the stream message.
`void`	`writeBytes(byte[] value)` Writes a byte array field to the stream message.
`void`	`writeBytes(byte[] value, int offset, int length)` Writes a portion of a byte array as a byte array field to the stream message.
`void`	`writeChar(char value)` Writes a `char` to the stream message.
`void`	`writeDouble(double value)` Writes a `double` to the stream message.
`void`	`writeFloat(float value)` Writes a `float` to the stream message.
`void`	`writeInt(int value)` Writes an `int` to the stream message.
`void`	`writeLong(long value)` Writes a `long` to the stream message.
`void`	`writeObject(java.lang.Object value)` Writes an object to the stream message.
`void`	`writeShort(short value)` Writes a `short` to the stream message.
`void`	`writeString(java.lang.String value)` Writes a `String` to the stream message.

Methods inherited from interface jakarta.jms.Message
acknowledge, clearBody, clearProperties, getBody, getBooleanProperty, getByteProperty, getDoubleProperty, getFloatProperty, getIntProperty, getJMSCorrelationID, getJMSCorrelationIDAsBytes, getJMSDeliveryMode, getJMSDeliveryTime, getJMSDestination, getJMSExpiration, getJMSMessageID, getJMSPriority, getJMSRedelivered, getJMSReplyTo, getJMSTimestamp, getJMSType, getLongProperty, getObjectProperty, getPropertyNames, getShortProperty, getStringProperty, isBodyAssignableTo, propertyExists, setBooleanProperty, setByteProperty, setDoubleProperty, setFloatProperty, setIntProperty, setJMSCorrelationID, setJMSCorrelationIDAsBytes, setJMSDeliveryMode, setJMSDeliveryTime, setJMSDestination, setJMSExpiration, setJMSMessageID, setJMSPriority, setJMSRedelivered, setJMSReplyTo, setJMSTimestamp, setJMSType, setLongProperty, setObjectProperty, setShortProperty, setStringProperty

- Method Detail
  - readBoolean
```
boolean readBoolean()
             throws JMSException
```
    Reads a boolean from the stream message.
    
    Returns:
    
    the boolean value read
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readByte
```
byte readByte()
       throws JMSException
```
    Reads a byte value from the stream message.
    
    Returns:
    
    the next byte from the stream message as a 8-bit byte
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readShort
```
short readShort()
         throws JMSException
```
    Reads a 16-bit integer from the stream message.
    
    Returns:
    
    a 16-bit integer from the stream message
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readChar
```
char readChar()
       throws JMSException
```
    Reads a Unicode character value from the stream message.
    
    Returns:
    
    a Unicode character from the stream message
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid
    
    MessageNotReadableException - if the message is in write-only mode.
  - readInt
```
int readInt()
     throws JMSException
```
    Reads a 32-bit integer from the stream message.
    
    Returns:
    
    a 32-bit integer value from the stream message, interpreted as an int
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readLong
```
long readLong()
       throws JMSException
```
    Reads a 64-bit integer from the stream message.
    
    Returns:
    
    a 64-bit integer value from the stream message, interpreted as a long
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readFloat
```
float readFloat()
         throws JMSException
```
    Reads a float from the stream message.
    
    Returns:
    
    a float value from the stream message
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readDouble
```
double readDouble()
           throws JMSException
```
    Reads a double from the stream message.
    
    Returns:
    
    a double value from the stream message
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readString
```
java.lang.String readString()
                     throws JMSException
```
    Reads a String from the stream message.
    
    Returns:
    
    a Unicode string from the stream message
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
  - readBytes
```
int readBytes(byte[] value)
       throws JMSException
```
    Reads a byte array field from the stream message into the specified byte[] object (the read buffer).
    To read the field value, readBytes should be successively called until it returns a value less than the length of the read buffer. The value of the bytes in the buffer following the last byte read is undefined.
    If readBytes returns a value equal to the length of the buffer, a subsequent readBytes call must be made. If there are no more bytes to be read, this call returns -1.
    If the byte array field value is null, readBytes returns -1.
    If the byte array field value is empty, readBytes returns 0.
    Once the first readBytes call on a byte[] field value has been made, the full value of the field must be read before it is valid to read the next field. An attempt to read the next field before that has been done will throw a MessageFormatException.
    To read the byte field value into a new byte[] object, use the readObject method.
    
    Parameters:
    
    value - the buffer into which the data is read
    
    Returns:
    
    the total number of bytes read into the buffer, or -1 if there is no more data because the end of the byte field has been reached
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
    
    See Also:
    
    readObject()
  - readObject
```
java.lang.Object readObject()
                     throws JMSException
```
    Reads an object from the stream message.
    This method can be used to return, in objectified format, an object in the Java programming language ("Java object") that has been written to the stream with the equivalent writeObject method call, or its equivalent primitive writetype method.
    Note that byte values are returned as byte[], not Byte[].
    An attempt to call readObject to read a byte field value into a new byte[] object before the full value of the byte field has been read will throw a MessageFormatException.
    
    Returns:
    
    a Java object from the stream message, in objectified format (for example, if the object was written as an int, an Integer is returned)
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to read the message due to some internal error.
    
    MessageEOFException - if unexpected end of message stream has been reached.
    
    MessageFormatException - if this type conversion is invalid.
    
    MessageNotReadableException - if the message is in write-only mode.
    
    See Also:
    
    readBytes(byte[] value)
  - writeBoolean
```
void writeBoolean(boolean value)
           throws JMSException
```
    Writes a boolean to the stream message. The value true is written as the value (byte)1; the value false is written as the value (byte)0.
    
    Parameters:
    
    value - the boolean value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeByte
```
void writeByte(byte value)
        throws JMSException
```
    Writes a byte to the stream message.
    
    Parameters:
    
    value - the byte value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeShort
```
void writeShort(short value)
         throws JMSException
```
    Writes a short to the stream message.
    
    Parameters:
    
    value - the short value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeChar
```
void writeChar(char value)
        throws JMSException
```
    Writes a char to the stream message.
    
    Parameters:
    
    value - the char value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeInt
```
void writeInt(int value)
       throws JMSException
```
    Writes an int to the stream message.
    
    Parameters:
    
    value - the int value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeLong
```
void writeLong(long value)
        throws JMSException
```
    Writes a long to the stream message.
    
    Parameters:
    
    value - the long value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeFloat
```
void writeFloat(float value)
         throws JMSException
```
    Writes a float to the stream message.
    
    Parameters:
    
    value - the float value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeDouble
```
void writeDouble(double value)
          throws JMSException
```
    Writes a double to the stream message.
    
    Parameters:
    
    value - the double value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeString
```
void writeString(java.lang.String value)
          throws JMSException
```
    Writes a String to the stream message.
    
    Parameters:
    
    value - the String value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeBytes
```
void writeBytes(byte[] value)
         throws JMSException
```
    Writes a byte array field to the stream message.
    The byte array value is written to the message as a byte array field. Consecutively written byte array fields are treated as two distinct fields when the fields are read.
    
    Parameters:
    
    value - the byte array value to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeBytes
```
void writeBytes(byte[] value,
                int offset,
                int length)
         throws JMSException
```
    Writes a portion of a byte array as a byte array field to the stream message.
    The a portion of the byte array value is written to the message as a byte array field. Consecutively written byte array fields are treated as two distinct fields when the fields are read.
    
    Parameters:
    
    value - the byte array value to be written
    
    offset - the initial offset within the byte array
    
    length - the number of bytes to use
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - writeObject
```
void writeObject(java.lang.Object value)
          throws JMSException
```
    Writes an object to the stream message.
    This method works only for the objectified primitive object types (Integer, Double, Long ...), String objects, and byte arrays.
    
    Parameters:
    
    value - the Java object to be written
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to write the message due to some internal error.
    
    MessageFormatException - if the object is invalid.
    
    MessageNotWriteableException - if the message is in read-only mode.
  - reset
```
void reset()
    throws JMSException
```
    Puts the message body in read-only mode and repositions the stream to the beginning.
    
    Throws:
    
    JMSException - if the Jakarta Messaging provider fails to reset the message due to some internal error.
    
    MessageFormatException - if the message has an invalid format.

Interface StreamMessage

Field Summary

Fields inherited from interface jakarta.jms.Message

Method Summary

Methods inherited from interface jakarta.jms.Message

Method Detail

readBoolean

readByte

readShort

readChar

readInt

readLong

readFloat

readDouble

readString

readBytes

readObject

writeBoolean

writeByte

writeShort

writeChar

writeInt

writeLong

writeFloat

writeDouble

writeString

writeBytes

writeBytes

writeObject

reset